BlackHorseROOFING & CONSTRUCTION
☰ Menu
Foam Roofs
One seamless layer from wall to wall. No seams to split, no laps to leak, and a bright white coating that turns back the desert sun.
CERTIFIEDCONTRACTOR
Made for flat roofs and hot summers.
Foam sprays on as a liquid and rises into one solid layer. Nothing to come apart at the seams.
The white coating reflects the sun, and the foam itself insulates. Your attic and your AC both feel the difference.
We build up the low spots so water runs to the drains instead of sitting on the roof.
Foam adds very little weight, so it can often go over the existing roof once it is checked and dry.
Five steps, no shortcuts.
Inspect
We walk the whole roof, find wet or damaged areas and photograph everything.
Prep
Clean the surface, cut out and replace anything wet or rotted, and seal the edges.
Spray foam
Foam goes on in even passes and is shaped so water drains off the roof.
Coat
A bright white protective coating goes over the foam to guard it from the sun.
Walk it with you
We go over the finished roof with you and leave the yard cleaner than we found it.
Our work, not stock photos.
Recoat it before it fails.
The coating is what protects the foam. Once it wears thin, the sun starts breaking the foam down and small problems turn into leaks. A recoat at the right time costs a fraction of a new roof.
We'll tell you honestly whether you need a recoat, a repair or a full replacement.
- !Bare, tan or blistered spots showing through the white
- !Standing water a day or two after it rains
- !Cracks, soft spots or holes pecked by birds
- !White powder coming off on your hand
- !Rust or stains around the AC stand and vents
Straight answers.
Do I need to tear off my old flat roof?
Not always. If the roof underneath is dry and solid, foam can often go right over it. We check for wet or damaged areas first and replace what needs it.
How do I keep a foam roof in good shape?
Keep the coating up. The coating protects the foam from the sun. We inspect it, clean it and recoat when it starts to wear, and the foam underneath keeps doing its job.
My foam roof has bare spots or standing water. Can it be fixed?
Usually, yes. We repair the damaged foam, fix the low spots and recoat, and we tell you honestly if it is past repair.
Do you do foam in Texas too?
Yes. Most of our foam work is in the Phoenix Valley, but we install and repair flat roofs in Texas as well.
We offer financing
Prefer to pay over time rather than all at once? Prequalify for financing today.*
*All financing is subject to credit approval. Your terms may vary. Payment options through Wisetack are provided by our lending partners. For example, a $5,500 purchase could cost $253.54 per month for 24 months, based on a 9.9% APR, or $1,833.33 per month for 3 months, based on a 0% APR. Offers range from 0 to 35.9% APR based on amount requested and creditworthiness. Not all merchants and lending partners participate in 0% interest programs. Terms range from 3 - 120 months and may vary based on merchant, lending partner, or transaction size. State interest rate caps may apply. No prepaid finance charges or participation fees. See additional terms at wisetack.com/faqs.
Know exactly what your roof needs.
We come to you, walk the whole roof and attic, and sit down with you to go over the photos. No pressure, no obligation.
Bonded and insured in Texas. Licensed, bonded and insured in Arizona, ROC #342877.